Rolled Paper Christmas Tree

I can't remember where I saw the idea for this easy rolled paper tree, quite truthfully I get ideas from so many places it all runs together! Fortunately for me I'm a paper scrap hoarder (I hate wasting paper!) so putting this together was a cinch. Super simple but cute - I'm thinking to add them to the top of wrapped gifts, or punching a small hole in the top and attaching string to hang them up. I stuck all of this together using glue dots so it's a very kid friendly project.

I used 7 different patterned papers (all from Stampin' Up), a 1" x 7" strip of chipboard for the base, 1 wood star, and a bunch of glue dots. The rolls are 1" wide at the top of the tree and 4.5" at the bottom, increasing each roll by 1/2"; each piece of paper is 3" long before coiling it. So for this tree I cut:

3" x 1"
3" x 1.5"
3" x 2"
3" x 2.5"
3" x 3"
3" x 3.5"
3" x 4"
3" x 4.5"

You can make your tree bigger or smaller (my tree is 8" tall) by changing the sizes of the rolls - by starting with 3 inches before coiling the paper, each of my rolled papers ended up making a 1" high roll.

To make each roll: Curl the paper around a pencil to help give it a curved shape before gluing the roll closed. Once you have as many rolls as you want, glue them to the chipboard and stick the star on the front. You could also put ribbon, a bow, or nothing on the top if you prefer! This would also be cool out of different wrapping papers - hey I have an idea,  you could even coordinate the tree to match your gift wrapping and lay it on top of the present ... oh I'm so going to do that!

Christmas Pinecone Wreath

I very easily turned my pinecone wreath (click here for that post) into a Christmas wreath by removing the feathers and spray painting the entire thing silver. Took me like 2 minutes and I love it. I sprinkled white glitter on the pinecones right after spraying them, but it didn't stick like that. Fortunately the silver paint is shiny enough that it looks great without  (unfortunately all the glitter that didn't stick landed in a big pile on the garage floor when I lifted the wreath, oops... Dave was super happy about that); if I really wanted it more sparkly I would brush white glue onto the pinecones and sprinkle with glitter, it'll definitely stick that way.

A tip for spray painting small objects is to do it inside a big cardboard box - I went outside on a not-windy day, put the wreath in a box that I set on it's side on the ground (sort of like creating a shadow box) then sprayed into the box, completely covering the brown pinecones. If you spray down into the box from above (instead of it being on its side), the fumes and spray come straight up in your face and that is not pleasant - turn the box on its side and spray into it that way. I didn't take a picture so use your imagination...it's a box on it's side. Tell me if you don't know what I mean and I'll post an example! Oh, and I did wear disposable gloves so it was easy to lift the wreath up a bit to cover all the pinecones.

 

I put this on a silver sequin placemat in the middle of my table; I had small votive candles in the center which was super pretty, but then Patty gave me an amaryllis bulb in a really pretty crock that fits exactly in the wreath - love!

the wreath before...

...and after

Felt Christmas Trees

Janis and I made these at "day camp" (along with the filled snowman ornaments) and they turned out even better than I imagined. Of course it took us waaaaaay longer than it should have, but that's only because we talked and laughed too much (and had to walk into town for lunch, and then got side tracked shopping on the way home LOL) - if you don't have all the distractions this is a fairly quick, easy, inexpensive project and you still have time to whip out a few for gifts, decorating, or to tie onto packages or stockings (you can easily vary the size of these trees!).

Our trees are about 10" tall - the tree itself is about 7" and the wine cork stand is 1 3/4" tall, plus the wire star on top. What actually took us the longest was trying to decide how to top them; we liked adding bells on the top, wood stars, felt balls, or even just plain - all of it was good! If you're making more than one you can do different toppers, we only made one each so committing to just one top was hard!

If you want taller or shorter trees just make the largest felt squares you'll be stacking bigger or smaller  (depending on the scale of your tree) - for our trees we used 6 of each size square starting with 3" as the largest square for the base of the tree, then went down in increments of 1/4" all the way down to 3/4" at the top of the tree.
So for us that meant cutting (we used a rotary cutter which saved time and spared our hands from having to use scissors hahaha, but cutting by hand would obviously work just fine!) the felt squares:
6 - 3"
6 - 2.75"
6 - 2.50"
6 - 2.25"
6 - 2"
6 - 1.75"
6 - 1.50"
6 - 1.25"
6 - 1"
6 - 3/4"
In addition, we started building the tree with 2 - 1 1/2" squares of thick brown felt but you don't really notice it so could skip, and one little 1/2"square for the tip top just to finish.

Supplies:

• Regular felt in your choice of colors. Note: I bought really thick felt online thinking that would make a nice tree but it didn't look as good as regular felt - the thinner felt just hangs better, thick felt was too solid and stiff looking. We made ours mostly green with a different color square in between each size change (for example: 6 - 3" green, 1 - 3" red, 6 - 2.75" green, 1 - 2.75" light brown, etc.).
• Wire that is a thick enough gauge to hold all the squares, but pliable enough to wrap around the base and form the star at the top. We used copper color, there are other colors available. We used approx. 2 feet, you'll need more or less depending on the size of your tree. 
• 3 wine corks for the base, hot glue to hold them together. 
• scissors or rotary cutter.

Directions:

First, make the base by hot gluing 3 corks together and wrap them tightly 2 or 3 times with the wire, then feed the long end of the wire up thru the middle of the corks so it is standing straight up off the base. 

Starting with either the 2 smaller brown squares if you're using, or the largest of the tree squares, skewer each square of felt onto the wire and push down to the base. We found it was easier to poke a hole in the middle of each square first with a thick pin but you can just push the felt onto the wire if the wire is strong enough. Continue adding the squares largest to smallest until you like how the tree looks. 

We were left with about 8" of wire at the top that we bent into a star shape - I had a little bit of a tail leftover so curled it around a wooden skewer to make a little curly-q to finish.

Other ideas - you could skip the base altogether and add a little string or twine to the top for hanging the trees or adding to the top of a package; you can think of something else for the base if you don't want the wine corks; multiple colors of felt would make for a fun whimsical tree - you could coordinate with your decorating scheme if you have one, or with your wrapping paper, or customize for the gift recipient if you know they have a favorite color.  

playing with different toppers - jingle bells are cute...
but so was felt balls...and wood stars...so many choices!

Painted Ornaments

Mary made me a super cute Scottie ornament last year for Christmas - she did other dogs as well but I didn't see any pics of them, if they're anything like the Scottie I'm sure they are equally cute! I don't know why I didn't blog them last year - so this year when she sent me photos of a basset hound ornament she made for another friend, and some pretty Christmas tree ones she made to hang from her dining room chandelier, I remembered to ask her how she did them and am definitely sharing this time around! 

Here's what Mary texted me when I asked for the deets: 

I freehand in white (or dark color for a different breed) on the plastic ball (you can scratch off mistakes if you do it quickly).  I painted the other colors over that. Then I used mod podge to paint the spots I wanted white and shook glitter over it. Same with other colors.  I think in hindsight I would do the darker colors first. I used a soft brush to brush away the extra glitter which sticks like a mutha on the plastic! I have “glitter glue” in a squirt on bottle that I used for the nose & the eye. I should probably top it with a fixative, but can’t remember if that’s what I did last year.    

supplies: craft paint, glitter, mod podge, brush, and clear plastic ornaments

There is no way I could freehand dog shapes right on the ornament like Mary does! And good thing you can scratch it off because I'm sure I'd be having to restart my shapes a bunch of times haha. What a great personal last-minute gift idea - love 'em!

12.12.2017: coincidentally, I posted the adorable pillow Mary me one year ago today!
12.12.2016: marquee letters  (using paper mache letters and christmas ornaments)
12.12.2015: fireball hot toddy

Bath Salt Ornaments

I love this easy little gift you can quickly make for everyone on your list that likes to take baths (I'm definitely in that category and might even make a couple for myself just 'cuz I like them so much - Merry Christmas to me hahah). I'm going to make shower cubes as an alternative gift and will post the results soon.

I saw this idea on the Doterra essential oil website. I'm just pasting directly from their site because I don't think I can say this any better - no need to reinvent the wheel :)

Everyone can use some extra peace and tranquility this holiday season. Give the gift of relaxation through essential oils. Disguise an aromatherapy Epsom salt bath treatment as a festive Christmas ornament. When it's not decorating your tree, this ornament will double as a therapeutic addition to your warm bath. Just take the top off and pour it in. Customize the color and aroma of each ornament for everyone on your Christmas list.

Ingredients

Round plastic ornaments

1 cup Epsom salt (you may need more or less depending on the size of your ornament)

5–10 drops favorite doTERRA essential oil

Instructions

1. Mix desired amount of Epsom salt in bowl and add some skin-safe colorant if desired
2. Add dried herbs or flower petals to mixture for color and added aroma
3. Add the essential oils of your choice; mix well
4. Add the bath salt to plastic ornaments until full
5. Once full, put the top of ornament back on
6. When ready to use, add desired amount to warm bath

12.11.2017: tinsel wreath
12.11.2016: chicken marsala
12.11.2015: make a Christmas tree

Santa's Wreath Making Workshop

This (a) is probably not something I'll ever be able to do at home, (b) is so cool that I wanted to share how it's done with you, and (c) puts my baggie wreath, tinsel wreath, sucker wreath, spooky hand wreath, etc. to shame!! This is serious wreath making right here...wouldn't it be great to have your own Santa's wreath making workshop at your house?!!

LeDonna took pictures for me (and you!) when she went to make wreaths at Dick and Becky's workshop where they make these gorgeous evergreen wreaths every year; she gets to go help out and make some too...we've been lucky enough to be on the receiving end of one of these wreaths every December for a few years now and it's something I really look forward to - I'll be bummed if she decides to stop making and sending them (I save a place for where it's going to be hung before I even know if she is sending one hahaha!).

You get an idea of what the process is by looking at the pictures - I asked what the thing is called that is hooked onto the table and attaches the evergreens to the wreath (it looks like a big stapler), she said
"Basically it is a big clamp!  There is a foot petal that we press down and that clamps the wires on wreath around each bunch of greens. There is one pic that shows the whole table and you see the foot pedal".

They gather a lot (seriously - A LOT - look at the piles!) of different kinds of evergreen clippings; trim the pine pieces into the right sizes, and make small bundles that they then lay, one at a time, on these special wreath frames that have small metal spokes every few inches around the edge; stepping down on the foot petal works the clamp on the table that bends the spokes around the bundles and holds them in place. They keep adding bundles and clamping in place until the whole wreath is filled in. To finish - they add a big, pretty bow and (most importantly) send to very,very lucky people :)

I really do love these wreaths, and had no idea how much work was involved - receiving one of these  beautiful, fresh, handmade wreaths has always been a joy, and now I'm even MORE appreciative :) Thanks for sharing your Santa Workshop pictures LeDonna, so interesting!

Around the Campfire (week 49)

Dear Campers ~

Here's the weekly recap of what happened at camp this week!

Posts you might have missed ~

12/2: around the campfire (week 48)
12/3: snowman tealights
12/4: snowman wreath
12/5: snowman ornaments
12/6: snowman treat holder
12/7: pumpkin snowman
12/8: snowman place setting (and some Christmas tree light tips!)

What's Cooking ~

• baked chicken and stuffing (I put the chicken in a casserole dish, spread with a little cream of mushroom soup, topped with a box of stuffing made according to the package directions, bake 350' for about 1/2 hour)
• grilled pork tenderloin, mushroom ravioli, roasted asparagus
• grilled tuna, greek salad (tomato, cuke, avocado, feta, roasted garbanzo beans)
• unstuffed chicken cordon bleu, roasted green beans, drop biscuits (will share recipe soon!)

Christmas is coming so fast! Next week I'll share some last-minute gifts you still have time to make (they are quick which helps!), a recipe or two, and anything else that I have time for when an idea pops up and I have to make it! Have a good week :)

Sincerely ~

your camp counselor, Jill

Snowman Place Setting and Christmas Tree Lights

I posted this back in 12/2015, since I've done 5 snowman things this week I thought I'd finish it up with a snowman repeat - isn't this fun? Super easy, and so cute.

I'm actually making another snowman craft but I didn't get it done in time to post today - mostly because my little Christmas tree's lights quit working last night and even though I was tempted to just go buy a new pre-lit tree I thought I'd try re-stringing it instead....and it took me most of the day! I took all the ornaments and stuff (and there's a lot of stuff) off, and then figured out how to remove the existing non-working lights - and in the process learned a couple very helpful tree-lighting tips!

Maybe you already knew this, but I didn't...the lights that were used to string the tree are icicle lights. Such a good idea that I wish I would have known years ago - the part of the light strand that hangs down and would form the icicle if you were hanging them as intended (for example across a railing or balcony), is what they used for each branch. One icicle is wound around one branch, repeating with the next icicle and next branch. Genius.

The other thing I discovered, and I wonder if these are for sale, is small plastic clasps shaped like a horseshoe were used to anchor the end of each icicle farthest out on the branch - I've never noticed them before and I'm going to see if I can find some for the next time I want to put lights up (I have string lights on my big bamboo/palm/whatever it is tree that is usually in my living room - I love having the little twinkle lights on all year 'round - the plastic clip things would be really helpful for something like that).

It wasn't what I planned to do today, but a couple good things came out of it and I now have a fully lit and decorated tree (can you believe Dave thought we should just leave the tree without lights up until after Christmas and deal with it then? What's the point of a Christmas tree if I can't have twinkle lights? Eye roll) that I will enjoy looking at for the rest of December.

Pumpkin Snowman

My sis posted back in October about how to preserve pumpkins to make a snowman in December (actually she didn't know how and questioned how to keep them from either rotting, or  being smashed by local bratty hoodlums haha click here for that post). She also (heavily) hinted at having someone else (me) make her said snowman from pumpkins. Even tho her begging annoys me, I did (sigh)  make her a pumpkin snowman (you knew I would) using - wait for it - just like I hinted at - artificial pumpkins.

Key note: I said back then that I'd pick up some cheap-after Halloween-fake-discount artificial pumpkins to make a snowman in December but guess what? Yeah, no fake pumpkin deals to be found. Ok, if you want to get technical, all the craft stores advertised "deals", but when I went to get them, no one...seriously annoying...actually had the fake white pumpkins available. Ergh. I'll give you a visual - me digging around in 3 giant bins labeled "70% off pumpkins" outside of Michaels...literally on tip toes (no short jokes please) trying to get to the bottom of these big deep bins, just to confirm there were no perfect white fake pumpkins for me to buy. Thanks for that, stupid bait-and-switch store.

Jill, being the crafty one, improvised. I found a fall garland on sale (70% off) that was all leaves and vines and gourds and other random shooty stuff that was supposed to be natural but nothing I've ever seen in nature....that had 3 gourd/pumpkin looking things attached that could be used for a mini pumpkin snowman, so that's what I did. And check it out - gotta say, super cute.

The 3 gourd/pumpkin things were different colors - orange, light green, and cream. Since I wanted a snowman, it was an easy fix to just paint all 3 of them white using basic acrylic craft paint. The eyes and mouth are flat black beads that I hot-glued on; the nose is a triangle of orange pipe cleaner, a button on the middle pumpkin, and insert a couple sticks for the arms; finish with a wired ribbon for the scarf.

I looked for a pre-made top hat thinking I could save a bit of time, but of course - because I was looking - I couldn't find anything the right size. Whatever...it's easy to just make one from black cardstock. Cut a circle for the base, a rectangle coiled strip for the hat, and then - stay with me - I had this button stack leftover from a craft Brooke and I did two years ago at Halloween (click here for the post) which is a couple buttons layered together and tied with a piece of black and white twine - that worked perfectly for the top of the hat. You can just do another smaller circle of black cardstock for the top of the hat if you don't have a random button stack tied with twine on hand :) Oh, and I added a rim of green metallic pipe cleaner to jazz up the hat - you can decorate it with whatever you got!

I did attach a circle of cardboard (top of an empty ribbon spool) to the bottom pumpkin to make the snowman more stable - depending how flat your pumpkins are you might want to do this. If you have a flat base it might stand up straight on its own - play around with it and see if it's level enough without an additional base to make it sturdy.

Snowman Treat Holder

Ronda gave me this treat holder and I didn't realize how cool it is until I opened it up - inside a cute double sided decorative paper pouch is a clear bag filled with marshmallows. When you lift the top flap, the inside bag opens and you can stick your hand right in the bag for the treats (in this case she has marshmallows in the bag - which is perfect with the snowman stamped image and paper of course!!). Another idea could be rudolph or reindeer paper with red hot candies in the bag.

This isn't hard to do at all, but my describing it is probably more confusing than it needs to be...hopefully the photos will help make things clearer!

Start with a 12" x 3" strip of Stampin' Up decorative paper, fold the bottom up 4.5" and the top down 2.5". You now have 3 sections of the strip - the two end sections fold together for the front of the holder, and the middle 5" of paper is now the back of the holder. Attach a small clear cellophane bag that is approx. 4"h x 3"w in between the bottom folded up flap and the middle 5" section. Fill the bag with whatever goodies you want, fold the top section down over the bottom section (enclosing the goodie bag) and stick in place with the adhesive of your choice - glue dots, glue stick, tape, whatever.

Did that make sense? Summary - fold a strip of paper in thirds and glue a baggie inside!

To finish the holder, Ronda punched out a red 2.75" decorative circle and a 2.5" white circle; stamped a cute snowman in the center of the white circle, then stuck the white circle on top of the red circle. She left the snowman plain for me to fill in, but I haven't had time to do that yet! Stamp and decorate any image you like, this snowman is especially fitting because the paper is snowmen and trees. Coordinating the stamp with the paper is an extra little creative touch. Stick the snowman circle overtop of where the front flaps meet.

One note - if you are using decorative paper that has a direction on it make sure it's going the right way when you fold the strip...otherwise when you open the package the image (in this example the trees) might be upside down. End of the world? No. Not as cute? Yes.