Got the idea for these from Michaels, I didn't have all the supplies they called for so I made them using what I have on hand. They came together really quickly once I made the pom poms - for those I found a tutorial
here to DIY a pom pom maker and it totally worked! I'm pretty stoked, I do love pom poms and now I know how to make them quickly and easily - I can feel my sister rolling her eyes at me as I write this, she's gonna love (wink) these earrings...
This is a two-part craft - I thought about making it 2 separate posts but if you want to make these in time to wear on July 4th I should give them both to you at once. This is a longer post than I normally do so bear with me!
First you need 2 pom poms, you can make them any size - mine are about 2". I made them in red so I'll have fun Fourth of July jewelry to wear with the blue and white cotton dress and red converse tennis shoes I'm planning to wear that day, make yours any color! Watch the
video to see step by step directions, it's quite easy. You'll need to cut a piece of yarn about a foot long before starting, set aside for now. Cut out 2 circles from cardboard, then cut a smaller circle inside and a notch on the side - they look like 2 "c"s once you're done. Hold the two pieces together and wrap yard as shown starting at one end of the c and wrap to the other end, then wrap back to where you started so there are 2 layers of yarn on the circles. With your non-cutting hand hold the yarn in place and don't let go while inserting scissors between the 2 circles with your cutting hand. Once again, don't let go! Cut thru the yarn as shown; still holding on to the yarn with one hand use your other hand to wind the long piece of yarn you cut in the beginning around the pompom between the 2 circles and tie in place. Remove the cardboard and trim the balls to make them even all around - that's the hardest part, getting the whole ball even!
 |
2" circle, then trace a 1/2" circle in the middle and cut out, also cut a notch so there is a place for the yarn to wind thru. After making the first one trace it onto the 2nd circle and repeat so you have 2 identical "c"s - they look like "c"s to me.
|
 |
| holding the two circles together, wind yarn around from one end to the other and back again |
 |
You'll need to hold onto the yarn that is wrapped around the inner circle - I'm not showing that 'cuz I need my other hand to take the picture! Insert your scissors between the 2 circles and cut thru the other edge of yarn (the middle of the circle stays intact) - don't let go of the inside part of yarn or you'll have little pieces of yarn and no pom pom!
|
 |
still holding the ball together with one hand, insert a length of yarn in between the 2 circles and pull tight.
|
 |
| knot the ends and remove the cardboard. Trim the pom pom so it's even all the way around. |
Now to make them into earrings...
Supplies I used per earring:
15 small blue beads
1 jump ring
1 crimp bead
1 spacer bead
fishing line
needle
2 tweezers
needle nose pliers
glue (if you want to get all serious about your project)
Thread the needle with fishing line and put the needle thru the middle of the pom pom. Then bring the needle up thru the bottom of the pom pom and knot it at the top. Cut off one end of the fishing line so you just have 1 strand to work with (if I was serious about these and wanted to make sure they don't break I'd put a dab of glue on the knot before cutting one end off - but this is just a fun little project and I don't care if they last forever). Remove the needle. Thread 15 beads onto the fishing line, then the spacer bead, the crimp bead, and lastly the jump ring. Run the fishing line back on itself thru the crimp bead, the spacer bead, and a couple of the blue beads pulling till taught but not so tight the beads buckle. Using needle nose pliers crush the crimp bead to lock the fishing line in place, then cut off the tail sticking out thru the blue beads (once again you could but a bit of glue there to make sure it stays put). Using 2 pairs of tweezers open the jump ring by twisting the sides away from each other - don't pull the ring apart that will make it all wonky and difficult to close, if you twist the end (one tweezer goes away from you and the other twists towards you); attach the jump ring to the loop on an earring hook then close the ring back up.
 |
after running fishing line thru and back up the middle of pom pom, tie it in a knot and remove one tail.
slide 15 small beads onto the other tail as shown. |
 |
add a spacer bead, crimp bead, and jump ring - then thread the tail back thru the crimp bean, spacer bead
and a couple of the blue beads. pull tight so there's no space between the beads then crush the crimp bead using needle nose pliers. cut off any tail that is sticking out. |
Remember the small pompoms I made into earrings last month? Now that I've learned how easy it is to make pompoms I found another fun thing to do with them - tack large ones onto the corners of a throw. I bought this throw for cheap planning to use it to back a crocheted afghan, but I've been seeing these pompom throws everywhere and wanted to make one...and since I've mentioned before what an instant gratification kind of crafter I am (using whatever I have on hand when the whim strikes) I'm using the throw for this project and will get something else for the backing!
